ID # 31618838

New Holland Discbine® PLUS Center-Pivot Disc Mower-Conditioners - Discbine® 313 PLUS

Call for Price
Overview

CUTTING WIDTH (FT. IN. (M))

13’ 1” (4.0)

TRANSPORT WIDTH (FT. IN. (M))

13’ 5” (4.03)

CLEANER AND CLOSER CUTTING

Get the cleanest and closest cut yet with the MowMax™ II PLUS true modular cutterbar. Faster knife tip speed, a slimmer cutterbar profile, and reshaped rock guards improve cut quality while providing a 30% lower cutting height.

TIME-SAVING INNOVATIONS

The standard QuickMax™ knife-change system and ShockPRO™ hubs are designed to save you hassle when you’re making hay. For ultimate peace of mind, a 2-year base warranty is standard along with an additional year of MowMax™ cutterbar warranty so you can cut with even more confidence.

PIVOT TO GREATER PRODUCTIVITY

Whether you need a nimble mower to enter tight places or big capacity for wide-open spaces, four center-pivot models, with cut widths from 10- to 16 ft. (3 to 5 m) wide, are designed and built with pride in New Holland, Pennsylvania.

FROM WIDE SWATHS TO NARROW WINDROWS 

Choose between the chevron intermeshing rubber or steel rolls, or the LeaningEdge™ flail tine conditioning system. Enhanced swath control surfaces behind the conditioning system result in neater-looking swaths with improved dry down.

 

Specifications
Model
Discbine® PLUS Center-Pivot Disc Mower-Conditioners
Category Name
Equipment
Year
2024
Manufacturer
New Holland
mowmax™ ii plus disc cutterbar

A CUT ABOVE THE REST

Haymaking season is no time for delays. That’s why we pioneered our true modular disc cutterbar decades ago. From this original design through today, the legendary New Holland disc cutterbar has been known for strength, reliability, and easy service. The latest design, the ultra-reliable MowMax™ II PLUS disc cutterbar, is no exception. Its commercial-grade durability and high-capacity, clean-cutting design will save you time and money.

LAWN-LIKE CUT, COMMERCIAL-GRADE DURABILITYNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

The MowMax™ II PLUS true modular cutterbar delivers our cleanest and closest cut yet. It’s similar to the cutterbar featured on Durabine™ PLUS disc headers for Speedrower® PLUS self-propelled windrowers, which means you get commercial-grade durability and performance. Plus, you’ll find a variety of enhancements over our previous generation.

• Longer knives extend each module’s cutting diameter by nearly an inch and turn at a faster tip speed compared to previous models.
• Reshaped rock guards provide better crop-to-knife engagement
• To improve cutting in light or late-season crops, the profile of the cutterbar was lowered by bringing the discs closer to the cutterbar with new low profile ShockPRO™ hubs.
• In combination with the longer knives, this design is more productive in down and tangled crops as cutting height is lowered over 30%, leaving less uncut crop behind.

SAVE TIME WITH THE QUICKMAX™ KNIFE-CHANGE SYSTEMNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

Time is precious when you’re making hay. To save you time and keep you cutting clean, the patented QuickMax™ knife-change system is standard on all Discbine® PLUS models. The system lets you quickly change knives with discs at a 45-degree angle to the cutterbar. In just seconds, you can change knives in just one-half cutterbar rotation, saving you time compared to traditional bolted knives and other competitive quick-change systems. Knife-lock technology assures that each knife is retained in the most difficult conditions. Best of all, the system does not require the use of special knives—it works with all approved New Holland knives.

WORRY ABOUT THE WEATHER, NOT YOUR WARRANTY

A 2-year base warranty is standard on all Discbine® PLUS models, effective July 1, 2023. The extended MowMax™ cutterbar warranty starts after the expiration date of the base warranty to provide an additional year of coverage. Cut with even more confidence.

SET THE HEIGHT YOU LIKENew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

It’s quick and easy to set cutting height using the travel-limiting pin. For the highest cut height, insert the pin into the rearmost hole. For the lowest setting, remove the pin and store it on the cylinder to allow the head to move through its full tilt range. For the best performance, operate headland lift in the float position, and the head tips back to adapt to terrain.

 

windrow & swath control

FROM WIDE SWATHS TO NARROW WINDROWS

Fast drying requires crop to be evenly distributed over a wide swath. To help, the Discbine® PLUS Series provides enhanced swath control surfaces behind the conditioning system.

THE ADVANTAGES OF SPREADING CROP WIDE AND THINNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

University tests confirm that the more leaves that are exposed to the sun, the faster crops dry and the more feed value is retained. Quick drying reduces sun bleaching and gives you an advantage when you need to beat the weather and bale or chop before the rain. Along with the WideDry™ conditioning system of your choice, the swath board wedges, and adjustable fins spread your crop wide and thin, exposing it to more sun for faster drying.

BETTER CONTROL MEANS BETTER WINDROWSNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

The full-width horizontal swath gate has been extended five inches longer than prior models for improved crop control and greater windrow uniformity. Adjustable crop-spreading wedges help break up crop streams, while adjustable crop fins provide additional windrow control. Windrows can be neatly shaped as narrow as three-feet-wide to any setting in between—up to six feet on the 310 PLUS, seven feet on the 312 PLUS, or eight feet on the 313 PLUS and 316 PLUS.

WEDGES AND FINSNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 313 PLUS

Windrow forming shields are over five inches taller than previous models and work with the swath gate to produce a tunnel effect. Specifically, this taller design—with greater curvature at the bottom—provides more precise windrow control, helping to tuck the edges in for neater-looking swaths with improved dry down.

 

technical specifications

Type

MowMax™ II PLUS true modular cutterbar

Cutting width (ft. in. (m))

13’ 1” (4.0)

Cutting height (in. (mm))

0.5 – 2.6 (12 – 65)

Cutting height with optional adjustable shoes (in. (mm))

0.5 – 5.6 (12 – 143)

Number of discs / knives per disc

8 / 2

Maximum disc speed @ 1,000 rpm PTO

2250

Hydraulic tilt/cutting height control

Standard

Tilt angle (degrees)

-2° to -10°

Header flotation

Vertical & lateral, adjustable springs

ShockPRO™ disc drive protection system

Standard

3-year factory cutterbar warranty

Standard

Chevron intermeshing rubber rolls

Optional

Chevron intermeshing steel rolls

Optional

Length (in. (mm))

125 (3175)

Diameter (in. (mm))

10.4 (264)

Drive method

Belt-driven, enclosed gearbox

Speed (rpm)

750 or 640

Conditioner roll tension adjustment

Standard

Conditioner gap adjustment

Standard

Compatibility

Optional

Number of tapered flail tines

120

Length (in. (mm))

125 (3175)

Diameter (in. (mm))

(55) 1400

Drive method

Belt

Speed (rpm)

1042 or 752 with kit

Conditioner gap adjustment

Standard

Swath width (ft. (m))

7 (2.1)

Windrow width (ft. (m))

3 – 7 (.91 – 2.1)

540 rpm, 6-spline 1.625 in. (41.3 mm) input speed

1,000 rpm, 21-spline 1.625 in. (41.3 mm) input speed

Standard

Slip and overrunning clutch protection

Standard

Drawbar swivel

Standard

Drawbar category

ASAE Category II or III

2-point semi-mount swivel

Optional

3-point hitch category

ASAE Category II, III-N, or III

Minimum PTO horsepower

90

Hydraulic requirement – rubber rolls

1 double acting, 1 single acting

Hydraulic requirement – steel rolls

1 double acting, 1 single acting

Hydraulic requirement – flails

2 double acting

Electrical

7-pin connector for transport lights

Transport width (ft. in. (m))

13’ 5” (4.03)

Operating weight – rubber rolls (lbs. (kg))

6255 (2837)

Operating weight – steel rolls (lbs. (kg))

6460 (2930)

Operating weight – flails (lbs. (kg))

6147 (2788)

literature
Name Link
Discbine® PLUS Center-Pivot Disc Mower-Conditioners - Brochure Download
Technical specifications Download