ID # 16709073
H&S 8100 Series HDII Rakes
Overview
Features |
- 5″ x 7″ Overhead Mainframe
- Each side opens independently.
- The windrow width on the HDII can be adjusted hydraulically to a maximum of 72″.
- One hydraulic remote along with the electrical control box, controls all the functions of the rake.
- Because of the offset of the rake wheel beams, there is no need for center kicker wheels.
- Rake wheel ground pressure can be adjusted by the threaded rod and nut on the end of the lifting pipes on each rake beam.
- The 60″ rake wheels on the HDII rake feature UV treated poly wind panels and an over center wheel stop.
- Torsional dampening springs allow the rake wheels to roll smoothly over the terrain.
- The rake wheel lift pipes slide in oil impregnated bronze bushings and also feature a rake wheel lock for transportation.
- The HDII rake features rake beams with a variable adjustment to set the rake wheels straight or in a tilted setting up to 10 degrees. (patented)
- Anti-wrap hay guards are standard equipment.
- The rake wheels may be lifted independently left or right or both at the same time with the master switch.
- An adjustable hitch and jack are standard equipment.
- A ball hitch is optional.
|
Specifications |
17 Wheels |
WHEEL DIAMETER |
60″ |
TEETH PER WHEEL |
38 |
TEETH |
Rubber Mounted in a set of 2 |
TRANSPORT WIDTH |
12′ 3″ |
TRANSPORT LENGTH |
28′ 3″ |
MAXIMUM RAKING WIDTH |
30′ 3″ |
RAKE WHEEL HUBS |
TAPERED BEARINGS |
HITCH JACK |
STANDARD |
TAIL & WORK LIGHTS |
STANDARD |
TIRES |
9.5L X 15SL |
|
|
18 Wheels |
WHEEL DIAMETER |
60″ |
TEETH PER WHEEL |
38 |
TEETH |
Rubber Mounted in a set of 2 |
TRANSPORT WIDTH |
13′ 3″ |
TRANSPORT LENGTH |
30′ 9″ |
MAXIMUM RAKING WIDTH |
31′ 3″ |
RAKE WHEEL HUBS |
TAPERED BEARINGS |
HITCH JACK |
STANDARD |
TAIL & WORK LIGHTS |
STANDARD |
TIRES |
9.5L X 15SL |
19 Wheels |
WHEEL DIAMETER |
60″ |
TEETH PER WHEEL |
38 |
TEETH |
Rubber Mounted in a set of 2 |
TRANSPORT WIDTH |
12′ 3″ |
TRANSPORT LENGTH |
30′ 4″ |
MAXIMUM RAKING WIDTH |
33′ 3″ |
RAKE WHEEL HUBS |
TAPERED BEARINGS |
HITCH JACK |
STANDARD |
TAIL & WORK LIGHTS |
STANDARD |
TIRES |
9.5L X 15SL |
|
|
20 Wheels |
WHEEL DIAMETER |
60″ |
TEETH PER WHEEL |
38 |
TEETH |
Rubber Mounted in a set of 2 |
TRANSPORT WIDTH |
13′ 3″ |
TRANSPORT LENGTH |
32′ 9″ |
MAXIMUM RAKING WIDTH |
34′ 3″ |
RAKE WHEEL HUBS |
TAPERED BEARINGS |
HITCH JACK |
STANDARD |
TAIL & WORK LIGHTS |
STANDARD |
TIRES |
9.5L X 15SL |
|
Specifications
Model
8100 Series HDII Rakes
Documents
Model
8100 Series HDII Rakes