Farm king - FRONT-END LOADERS 95, 2000 Series

• With one of the largest mounting kit application lists in the industry, there is an Allied front-end loader available for nearly every tractor, large or small, new or old. Custom colors are available to match all tractor brands which adds resale value and visual appeal.

MECHANICAL TRUE SELF-LEVELING

• These loaders pick up where others drop off. The TSL system eliminates the variable "waving" action of leveling during the lift and lower cycle, so common in some other brands. During the raise/lower cycle, the bucket stays perfectly level or at the desired position. Not just approximately - precisely. The TSL system provides full dump at ground, and additional roll back as the loader raises.

CUSHION RIDE

• Driving across rough ground with a loaded bucket or suddenly dropping a heavy load can be hard on the tractor, loader and operator. Cushion Ride effectively feathers these shocks and bumps, similar to the shock absorbers in a vehicle. This provides smoother loader operation and adds longevity to the loader and loader components.

HYDRA FAST

• One lever couples or disengages all hydraulic lines, for two, four or six outlets, for a clean, quick and easy connection even under pressure. This takes the guess work out of incorrect line connection, ensuring your hydraulic lines are hooked up properly every time.

HYDRAULIC CYLINDER

• A front-end loader is only as powerful and dependable as its hydraulic cylinders. Large diameter cylinder rods and thick chrome plating complement the longevity of the cylinder life. Larger diameter lift and bucket cylinders provide a higher lift capacity and stronger rollback power which is particularly important for bale spear application for mid-sized loaders because the weight is so far forward.

• QUICK DISCONNECT

1. Remove the parking stands from their storage compartment on the loader arms.

2. Midmount Series - Remove lock pin on each side of Midmount models. No tools required.
2. 95 Series - Loosen bolt on each side of the 95 series

3. Back away tractor and disconnect the hydraulics. Reverse the procedure for re-mounting the loader.

SKID STEER QUICK ATTACH

• A skid steer quick attach is available on 95 Series models up to 595, making these front-end loaders a multi-use tool carrier that are truly adaptable to take on any task. Mechanical true self-leveling is available on models 595 to 895.

LIFT CAPACITY

• Most 95 Series loaders are available with larger lift and bucket cylinders for greater lift capacity. The bucket quick attach is a standard feature on the 95 Series (model 495 and larger) and is optional on smaller models.

MOUNTING KITS

• Most of our 95 Series mounting kits have rear axle bars that connect our mounting kits to the rear axle of the tractor providing increased strength and support. All of this minimizes stress on the loader, loader components and tractor frame to enhance longevity.

QUICK ATTACH

• The Midmount 2000 Series quick attach method, standard on the 2495 and larger models, is consistent with the Euro style system to allow for improved interchangeability of attachments. An optional skid steer quick attach truly makes your front-end loader a multi-use tool carrier. Available for models up to 2595.

CLEARANCE

•  Midmount loaders feature grease fittings at the outer end of the pins for easier greasing. Improved clearance means that front fenders can usually remain in place, servicing of the tractor is easier, and full wheel oscillation and turning radius can be maintained without any restrictions.

HEAVY-DUTY PARALLEL BUCKET LINKAGE

• A distinctive feature on all Allied Midmount 2000 Series front-end loaders is the heavy-duty parallel bucket linkage, usually seen only on self-leveling loaders. This greatly increases rollback and dump angles.