PL88C open barrel pintle chain @ 29,900# per strand = 119,600#, w/2″ x 1″ x 3/16″ formed apron channels for apron cross bars.
Top Pivot Door w/Air Gate Delay (Truck Mount)
Barn Doors w/Air Closure (Truck Mount)
Top Pivot Door w/Hydraulic Gate Delay (Chassis Mount)
The “BIG DOG” features 1″ steel lines to the back of the box and DUAL HYDRAULIC MOTORS. The motors evenly drive each final drive system for more power and less shaft stress than a single motor system.
The drive shaft features MD nylon reversible style bearings.
16 Gauge Stainless Steel Sides.
Large 17″ x 28″ front window for viewing when unloading.
The idler apron shaft assembly features 6 tooth machined steel sprockets with bronze idler bushings.
Apron tension adjustment is made by tightening the 4 spring loaded tightener bolts on the front of the box. The spring loaded tighteners maintain tension on the apron during start up and operation.
Spring Loaded Main Apron Tighteners.
LED Lighting and Door Locks.
Available with an Optional Rollback or Side to Side Tarp.
A Front hydraulic drive is optional.
Features
Gate Delay
An Air Gate Delay (Truck Mount) or Hydraulic Gate Delay (Chassis Mount) for the Top Pivot Door allows you to clean the box out completely without material hanging up.
Drive Shaft
The drive shaft features MD nylon reversible style bearings.
Drive System
Dual Hydraulic Motor Drive System
OPTIONS
Optional Rollback Tarp
Specifications
26′
CAPACITY - STRUCK LEVEL
1477 cu. ft.
BOX WEIGHT
N/A
INSIDE LENGTH
26′
INSIDE WIDTH
98″
INSIDE HEIGHT
86″
OVERALL LENGTH
27′ 7″
OVERALL WIDTH
102″
OVERALL HEIGHT INCLUDING TAILGATE
N/A
SIDE HEIGHT
N/A
DRIVE SYSTEM
Dual Hydraulic Motors
FINAL DRIVE SYSTEM
Dual Final Drive w/ Oil Bath and Spring Loaded Tightener
MAIN APRON CHAIN & SLATS
PL88C Open Barrel Pintle 2″ x 1″ x 3/16″ Formed Apron Channels