- Monday 8:00 AM - 5:00 PM
- Tuesday 8:00 AM - 5:00 PM
- Wednesday 8:00 AM - 5:00 PM
- Thursday 8:00 AM - 5:00 PM
- Friday 8:00 AM - 5:00 PM
- Saturday 8:00 AM - 12:00 PM
- Sunday Closed
Heavy Duty Manure Spreader
|
Features |
2 Speed Apron Drive The two-speed apron drive is standard equipment on Model 3127. An optional variable speed hydraulic drive is also available. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Apron Adjustment Adjustment for the main apron is easy, by simply loosening the two side bolts and drawing up the long bolt. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Apron Idler Slides H&S uses cast special steel alloy apron idler slides instead of idler sprockets making for years of dependable service. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Beaters H&S Spreader model 3127 has a 29″ diameter beater with 14 replaceable beater paddles. The beater has two types of paddles, blunt for widespread and sharp ripper type for cutting and shredding. The beater side wiper blades are also standard equipment on Model 3127. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Easy Clean Out Sides, front panel and both sides of the rear hydraulic end gate on the 3127 uses fiberglass reinforced plywood to provide for easy cleaning and minimal freeze up. The 3127 model features a plastic coated plywood floor. Considerably less torque is needed to move a heavy load. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Gear Box Gear box mechanisms and drive for the beater and apron on the 3131, 3137, 3143 and W3143 are Timken tapered roller bearing equipped. The beater drive gear box is 1-1½ bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut off. The apron drive is a 50:1 bronze worm gear with shear bolt protection. | |||||||||||||||||||||||||||||||||||||||||||||||||||
OPTIONS | |||||||||||||||||||||||||||||||||||||||||||||||||||
A variable speed hydraulic drive is also available on 3123, 3127, 3131, 3137, 3143, and W3143. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Top beater to provide load leveling and spreading of high heaped loads is available on 3123, 3127, 3131, and 3137. | |||||||||||||||||||||||||||||||||||||||||||||||||||
A rear pan is optional on all models. | |||||||||||||||||||||||||||||||||||||||||||||||||||
A semi-liquid hydraulic end gate is standard equipment on all models. An optional second hydraulic end gate cylinder is available for the 3123, 3127, and 3131. The hydraulic lines are run through a 3x3 tube under the floor. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Specifications | |||||||||||||||||||||||||||||||||||||||||||||||||||
|